• Fits the footprint of older canopy lights
  • Vandal resistant and UV resistant lens
  • Ultra-high efficiency
  • Clean, contemporary, low-profile design
  • Available with drop lens or flat lens
  • IP66 rated, keeps dust, bugs and water out
  • Photo and motion sensor options available
View Technical Specs
Performance
Watts 10W
Color Temp 5000K (Cool)
Lumens 2,001 lm
Efficacy 142.9
Color Accuracy 84 CRI
L70 Lifespan 100,000 Hours
Type Constant Current
120V 0.12A
208V 0.07A
240V 0.06A
277V 0.05A
Input Watts 14W
Dimensions
Link to Dimension Drawing

Weight: 11.5 lbs

Technical Specifications
Compliance
UL Listed
Suitable for Wet Locations. Covered Ceiling Mount Only.
IESNA LM-79 & LM-80 Testing
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating
Ingress protection rating of IP66 for dust and water
DLC Listed
This product family is listed with the DesignLights Consortium (DLC). Individual SKUs within this family may carry either a DLC Standard or DLC Premium qualification. Please refer to the individual product specification sheet or the DLC Qualified Products List (QPL) at designlights.org to confirm the qualification status of a specific SKU prior to specification or purchase.
Electrical
Driver
Class 2, Constant Current, 120-277V, 50-60Hz, 120V: 0.12A, 208V: 0.07A, 240V: 0.06A, 277V: 0.05A
Dimming Driver
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD
16.15% at 120V, 12.87% at 277V
Power Factor
96.7% at 120V, 93.1% at 277V
LED Characteristics
LEDs
Long-life, high-efficacy, surface-mount LEDs
Color Stability
RAB LEDs exceed industry standards for chromatic stability
Color Uniformity
RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Maximum Ambient Temperature
Suitable for use in up to 75°C (167°F)
Cold Weather Starting
The minimum starting temperature is -40°F (-40°C)
Lens
Vandal-resistant polycarbonate textured opaque for low glare drop lens
Housing
Die-cast aluminum housing and lens frame with (4) 1/2" NPS side conduit entries and weatherproof rear wire plug and access plate
Air Tight
Housing certified Air Tight as per ASTM-E283
Finish
Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Installation
Mounting
Ceiling mount to recessed junction with knockout template or directy to ceiling surface, utilizing side conduit entry points
Sensor Settings
Capacitance Load
400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature
-4°F to +140°F(-20°C to +60°C )
Relay
Zero-cross relay
Maximum Mounting Height
16.4 ft
Customizable Detection Area
10, 50, 75 or 100%
Time Delay
5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period
0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level
10, 20, 30, 50%
Cut-Off Power
Less than 1W
Daylight Threshold
About .2-5 fc for disabled
Sensor Principle
High Frequency
Microwave Frequency
5.8GHz +/- 75MHz
Microwave Power
<0.2mW
Max Detection Range
26 ft diameter at 16 ft mounting height
Detection Angle
About 30 to 150 degrees
Remote Control Accessory
Adjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.
Other
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Performance
Wattage Equivalency
Equivalent to 70W Metal Halide

Recently Viewed Products

 This is a link to the product VANLED10W/MVS VANLED10W/MVS
Canopy Lights 2001 Lumens Vanled 10W 5000K 0-10V Dimmable 120V-277V Drop Clear Lens Microwave Sensor White
 This is a link to the product FFLED18YW FFLED18YW
Floodlights 2069 Lumens Ffled 18W 3000K White
 This is a link to the product RDLED2R8-WYHC-TB RDLED2R8-WYHC-TB
Recessed Downlights 451 Lumens Rdled2R8 2 Inch Round 8W Wall Washer Beam Spread 90Cri 3000K 1/2 Inch Trim Black Trim Ring
 This is a link to the product HTG-SWM/480/MVS HTG-SWM/480/MVS
Htg Square 120/100/80/60W T3/T5 3000/4000/5000K 480V Wall Mount Mvs Bronze
 This is a link to the product NDICLED3R-15LN NDICLED3R-15LN
Rough-In Ic Rated 3" Rnd 15W Lutron 4000K 80Cri Trim Std
 This is a link to the product ARBAY2-160/PIR/E2/8CPT2 ARBAY2-160/PIR/E2/8CPT2
Aerobay 2Ft 160W 5000K 277V Passive Infrared Sensor Battery 8Ft Twist Lock White
 This is a link to the product VANLED10W/MVS VANLED10W/MVS
Canopy Lights 2001 Lumens Vanled 10W 5000K 0-10V Dimmable 120V-277V Drop Clear Lens Microwave Sensor White
 This is a link to the product FFLED18YW FFLED18YW
Floodlights 2069 Lumens Ffled 18W 3000K White
 This is a link to the product RDLED2R8-WYHC-TB RDLED2R8-WYHC-TB
Recessed Downlights 451 Lumens Rdled2R8 2 Inch Round 8W Wall Washer Beam Spread 90Cri 3000K 1/2 Inch Trim Black Trim Ring
 This is a link to the product HTG-SWM/480/MVS HTG-SWM/480/MVS
Htg Square 120/100/80/60W T3/T5 3000/4000/5000K 480V Wall Mount Mvs Bronze
Link to Live Chat

Contact us

A RAB support representative will respond soon.

Send a message
Link to Lighting Design

Lighting Design

Our lighting designers can help you create a custom layout.

Request Lighting Layout
Link to DLC qualified products

DesignLights Consortium®

Find DLC qualified products.

Learn More
Link to Where to Buy

Where to Buy

Find a distributor or RAB Sales Representative.

Go to Locator